How to Make Wooden Fence

There are plenty of kits of slats the fencing for sale, but you might prefer a fanciful version. After all, you can choose the format and height suitable for your garden and home. The vertical fins usually put 35 to 50 mm from each other. With an abnormal opening is transparent, more or less, which can give an entirely different effect.Through the slats to provide a different length of a round or an offset above the line can be made vertical slats usually put 35 to 50 mm from each other. With an abnormal opening is transparent, more or less, which can give an entirely different effect. Through the slats to provide a different length of a round or an offset above the line can be made. Also, the lifting of the slats vary. There are many ways to give your fence a personal comment.

It is best to put the pieces of the fence ahead of time on the ground in each other, and this, as with kits as a whole to attach the joists. In fact, it is not so easy to nail the slats to the back and forth, swishing rules.

Tight transom

Instead of styles among the 50 x 75 mm into the ground at a distance of 2 to 2.75 m. Hardwood piles can be put directly on d ground, can other wood be better botonvoeten or pole brackets rest.
Cut lengths of 32 x 50 mm heavy duty slats off to position horizontally against the poles. When a style has to fall between the line in the Middle, so that the following can turn against it. At the end stile reaches the line up to the outer side of the post.
Enter correct mounting height of the rules at the posts down. At a gate height of 1.2 m is located below the line about 0.3 m from the ground and the upper beam about 0.15 m from the top of the style.Explain the rules on a hard surface and at desired distance from each other and ensure that managers are focused.

The opspijkeren of the bars

Cutting length standing fins and put them on policies. The distance between the bars is 35 mm or the size you want. Place a length of line at the pointed or round head of the slats to get them on the same level. Then tighten each slat on lines with two 30 mm long nails. Place the nails diagonally in timber, if possible, a little inwards. Then the strips are not so easily deducted, which often occurs in the elderly.
When a wooden spool is used as a positioning of the strips on the distance to be able to keep the same distance. Place the template each time compared to the previous bar, fit the next bar and nail him and continue until the entire section. Make sure it is at the beginning and end of the rule for which a length of 10 cm remains free to attach it to the record.

Attaching sections

The determination of self-made sections do not differ from the attachments of ready-to-eat panels. Keep a section against the post and place him on a couple of stones, so the 5-6 cm from the ground. Fit the Panel with a spirit level on the top line. Nail these on each side of the style, look again if it is level and then attach the bottom rail. By making the fixed sections with consoles, they can get caught between the posts, be it to iron or building remains visible.